Shaped double-sided lighted cabinet sign on a post
Light Boxes

Light Box Signs for Long Island and Arlington, TX Businesses

Dollar Sign designs, builds, and installs LED light box signs for storefronts, plazas, and offices on Long Island and in Dallas-Fort Worth. One team handles the drawing, the cabinet, and the install, so the sign on your building matches the proof you approved.

In Texas? Send your project to our Arlington, TX team.

Long Island and Arlington, TX

4.9-star Google rating
from 500+ reviews in New York

Design, fabrication, and install
by one in-house team

Custom quote within 24 hours
on Long Island and in Dallas-Fort Worth

Pylon sign with lighted Lexan face panels

process vectorHow They Are Built

What a Light Box Sign Is

A light box sign, also called a cabinet sign, is an aluminum box with a translucent face and LED modules inside. The whole face glows at night, so your name, logo, and colors read as one bright panel from the road or the parking lot. Cabinets can be single-faced on a wall or double-faced on a pole or bracket, and they can be built square, round, or cut to the outline of your logo.

A cabinet is one piece, which makes it simpler to install and service than individual channel letters. Faces can be swapped when your branding changes, and the box stays on the wall. Light boxes are one of the exterior signs we build at both our Farmingdale and Arlington, TX shops.

  1. 1

    Aluminum cabinet

    The frame and sides that hold everything together. Painted to match your brand or the building, with depth set by the face style and lighting.

  2. 2

    LED modules

    Low-voltage LED modules mounted inside the cabinet, spaced for even light across the face with no hot spots.

  3. 3

    Face

    Flexible vinyl, acrylic, polycarbonate, or routed aluminum. The face material decides how the graphics look by day and how the light comes through at night.

  4. 4

    Retainers

    The frame around the edge that holds the face in place. Hinged or removable retainers make face changes and service simpler.

  5. 5

    Power supply

    Mounted inside the cabinet and connected to a dedicated circuit, with a disconnect switch where required.

process vector 1Face and Cabinet Styles

Choose the Right Light Box

The face material and cabinet shape change how the sign looks in daylight, how it glows after dark, and how easy it is to update later.

Flex face cabinets

A flexible vinyl face is stretched tight across the cabinet with a tension frame. It handles large sizes in one piece with no seams, and it stands up well to impact. Graphics are printed or applied directly to the face.

When to choose itLarge signs on wide fascias or pylons where one continuous face matters more than fine detail.

Acrylic and polycarbonate faces

Rigid translucent panels decorated with vinyl or digital print. Acrylic gives a crisp, bright look, and polycarbonate adds impact resistance for signs at reachable heights. Both are common for wall cabinets and tenant panels.

When to choose itMid-size storefront and plaza signs where you want sharp graphics and a classic lit cabinet.

Routed aluminum with push-through letters

The face is solid aluminum, routed out in the shape of your letters and logo. Thick acrylic letters push through the openings so only the copy glows, while the rest of the face stays dark at night.

When to choose itBrands that want a premium look at night, with the name lit and the background dark.

Routed aluminum, backed faces

The aluminum face is routed and backed with translucent acrylic from the inside. The copy lights up flush with the face, without the depth of push-through letters.

When to choose itA clean, flat look with lit copy, at a lighter build than push-through.

Double-faced and projecting cabinets

Two faces in one cabinet, mounted on a bracket off the wall or on a pole. Drivers and walkers see the sign from both directions.

When to choose itCorner buildings, busy roads, and sites where traffic approaches from both sides.

Shaped cabinets

The cabinet is built to the outline of your logo, a circle, or a custom form instead of a rectangle. It reads as a logo on the wall, not a box.

When to choose itStrong logo shapes and buildings where a plain rectangle would look generic.

process vector 1Our Process

How a Light Box Project Runs

  1. 1

    Consult and site survey

    We measure the sign area, look at the wall or pole, and check where power can reach the cabinet. We also note what your landlord and town will ask for.

  2. 2

    Design and proof

    You get a proof showing cabinet size, face style, colors, and mounting. Nothing is built until you approve it.

  3. 3

    Permit and landlord support

    We help prepare drawings and details for your permit and your landlord's sign criteria. Approval timing is set by the town or city and the landlord.

  4. 4

    Fabrication

    The cabinet is built, painted, and fitted with LED modules and the power supply. The face is cut, decorated, and test-fit before it leaves the shop.

  5. 5

    Installation

    Our installers mount the cabinet, connect it to the circuit, and set the face. We check that the face lights evenly before we leave.

process vectorGetting a Quote

What to Send Us

The more we know up front, the more accurate the first number is. You do not need all of this to start, but each item saves a round of questions.

  • Your logo as a vector file (AI, EPS, PDF, or SVG) if you have one.
  • Two or three photos of the wall or pole, one straight on and one from the street.
  • The rough width and height of the sign area.
  • Single or double-faced, and wall mounted or projecting.
  • Your landlord's sign criteria if you lease in a shopping center or plaza.
  • Whether there is power at the sign location today.

process vector 1Install Day

What to Expect on Install Day

Our crew arrives with the cabinet, the mounting hardware, and the lift or ladders the location calls for. We mark the mounting points from the approved proof, fasten the cabinet or bracket to the structure, and make the electrical connection to the circuit.

Before we leave, we power the sign on, check the face for even light, and clean up the work area. We plan around your entrance and parking so your business can keep running.

process vectorPricing

What Affects the Cost of a Light Box Sign

Every light box is built to order, so the price depends on the size, the build, and the site. These are the main factors we look at.

Size

Larger cabinets use more aluminum, more face material, and more LED modules.

Face style

Flex and acrylic faces cost less than routed aluminum, and push-through letters add the most fabrication.

Single or double-faced

A second face adds material and lighting, plus a bracket or pole for projecting signs.

Cabinet shape

Shaped cabinets take more layout and fabrication than a standard rectangle.

Mounting and access

Wall height, lift needs, and the structure behind the wall change the install time.

Electrical

Power already at the sign is simpler. A new circuit or a long run adds work.

process vectorTwo Locations

Serving Long Island and Dallas-Fort Worth

Same company, same in-house process. Reach the team closest to your project, or browse all of our sign services.

New York

Farmingdale, NY

1021 Fulton St, Farmingdale, NY 11735

Serving Nassau County, Suffolk County, and greater New York. Mon to Fri, 9am to 5pm. Saturday by appointment.

Texas

Arlington, TX

7100 S Cooper St, Arlington, TX 76001

Serving Arlington, Fort Worth, Dallas, and the Dallas-Fort Worth area. Contact: Estimating Team, info@dollarsignus.com.

Every town on Long Island and every city in Dallas-Fort Worth sets its own rules for lit signs.

Size limits, lighting rules, and approval steps change from one town or city to the next, and many shopping centers add their own criteria. We help with the drawings and details, and approval timing is set by the town or city. Need help with approvals? See our sign permit expeditor service.

process vectorCare and Lifespan

Caring for Your Light Box Sign

A light box needs very little attention. LED modules run cool and last far longer than the fluorescent tubes in older cabinets. Keeping the face clean keeps the light bright, and a quick look after storms catches loose retainers early. If an older cabinet still runs tubes, our sign retrofit service can convert it to LED.

When your branding changes, the face can usually be replaced while the cabinet stays on the wall. That saves the cost of a new sign and avoids a new set of holes in the facade.

Simple upkeep

  • Clean the face with mild soap and water and a soft cloth, never an abrasive pad.
  • Check the sign after storms for loose retainers or a shifted face.
  • Put the sign on a timer or photocell so it runs only when it should.
  • Call us if part of the face goes dark, since one module or a power supply is often the cause.

process vectorOur Projects

Recent Exterior Sign Projects

Happy Dollar Sign clients
5 stars

4.9 Rating in New York

Signs and graphics designed, built, and installed by our team. Browse more finished work in our project gallery.

Project photos are loading.

process vectorFAQs

Light Box Questions

What is the difference between a light box and channel letters?

A light box is one cabinet with a single lit face. Channel letters are individual lit letters mounted to the wall. Light boxes are simpler to install and update, while channel letters follow the exact shape of your name.

Get a Light Box Quote in 24 Hours

Send us your logo, photos, and sign size, and we will send a custom quote within 24 hours. Long Island and Arlington, TX customers are welcome.

Texas projects: call 817-883-0676 or use the Arlington quote form.