Premium dimensional sign with warm lighting on a backer panel
Carved & Gold Leaf Signs

Carved and Gold Leaf Signs for Long Island and Arlington, TX Businesses

Carved signs have depth, shadow, and texture that flat signs cannot match. Dollar Sign builds hand-finished carved HDU and wood signs with real gold leaf, sandblasted textures, and painted finishes. We design and install them from Farmingdale for Long Island and from our new Arlington, TX shop for Dallas-Fort Worth.

In Texas? Send your project to our Arlington, TX team.

Long Island and Arlington, TX

4.9-star Google rating
from 500+ reviews in New York

Design, fabrication, and install
by one in-house team

Custom quote within 24 hours
on Long Island and in Dallas-Fort Worth

Dimensional cut letters mounted on an office wall

process vectorWhat It Is

Dimensional Signs With a Hand-Finished Look

A carved sign is cut from a solid panel so the lettering and artwork have real depth. We work mostly in high density urethane (HDU), a dense board that carves cleanly, takes paint well, and will not rot, crack, or warp like natural wood outdoors. For clients who want natural grain, we also carve wood. Letters can be V-carved into the surface or raised above a textured background. The result reads as crafted and permanent, which suits upscale retail, restaurants, and historic districts. For hanging versions, see our blade signs.

Gold leaf takes it a step further. Thin sheets of genuine gold are laid by hand over a sizing adhesive, then burnished so the letters catch light from every angle. 23k gold leaf is common for this work because it holds its color outdoors. We also carve interior pieces for lobbies and offices that want a warm, classic feel alongside their other interior signs.

  1. 1

    HDU or Wood Panel

    The base is a solid HDU or wood panel sized to your space. HDU is our standard for outdoor work because it stays stable in weather.

  2. 2

    Carved Lettering

    Letters are V-carved into the face or left raised above the background. Both create shadow lines that make the sign readable from an angle.

  3. 3

    Textured Background

    Sandblasted or routed textures mimic wood grain, stone, or stipple. Texture adds contrast behind smooth raised letters.

  4. 4

    Gold Leaf Gilding

    Genuine gold leaf is applied by hand to letters, borders, or icons. It reflects light and stays bright without paint fading.

  5. 5

    Painted Finish

    Multiple coats of primer and exterior paint seal the panel. Colors are matched to your brand or historic palette.

process vector 1Styles

Carved Sign Styles We Make

Each style creates a different level of depth and detail. We help you pick the one that fits your building and brand.

V-Carved Lettering

Letters are cut into the panel with a V-shaped groove. Light hits each side of the groove differently, so the lettering looks sharp and engraved.

When to choose itChoose it for a classic, traditional look, especially with gold leaf in the grooves.

Raised Lettering

The background is cut away so the letters stand above the surface. Raised letters cast shadows and read well from a distance.

When to choose itChoose it when you want bold, readable letters with strong depth.

Sandblasted Signs

A blasted background gives a rough, wood-grain or stone texture behind smooth letters. The contrast in texture adds visual interest without extra color.

When to choose itChoose it for a rustic or natural feel at wineries, farms, and parks.

Gold Leaf Gilded Signs

Genuine gold leaf is applied by hand to carved letters or details. Gilding reflects light and gives the sign a premium, lasting finish.

When to choose itChoose it for upscale retail, law offices, banks, and historic storefronts.

Painted Carved Signs

Carved panels finished with exterior paint in your brand colors. Multiple colors can highlight letters, borders, and artwork.

When to choose itChoose it when you want carved depth with full brand color and no metallic finish.

Interior Carved Pieces

Carved and gilded panels sized for lobbies, reception walls, and conference rooms. They pair well with wood, stone, and traditional interiors.

When to choose itChoose it when your lobby calls for warmth and craftsmanship over acrylic or metal.

process vector 1Our Process

How a Carved Sign Project Runs

  1. 1

    Consult and Quote

    Tell us where the sign goes, its size, and the look you want. You get a custom quote within 24 hours after we receive your details.

  2. 2

    Design and Proof

    We lay out lettering, carving depth, textures, and finish colors on a scaled proof. You approve the proof before we cut anything.

  3. 3

    Carving

    The panel is carved in our shop with V-carved or raised letters and any textured background. Edges and details are cleaned up by hand.

  4. 4

    Finishing and Gilding

    We prime and paint in multiple coats, then hand-apply gold leaf where the design calls for it. Each piece is inspected before it leaves the shop.

  5. 5

    Install

    Our crew mounts the sign with posts, brackets, or wall hardware suited to the surface. We check level, secure every point, and clean up when done.

process vectorGetting a Quote

What to Send Us

A few details help us quote carved work accurately. Send what you have.

  • Sign location and a photo of the wall, post area, or frontage
  • Approximate size you want
  • Logo or wording for the sign
  • Preferred style: V-carved, raised, sandblasted, or a mix
  • Finish: gold leaf, painted, or both
  • Any historic district or landlord design guidelines

process vector 1Install Day

What to Expect on Install Day

Carved signs mount in several ways: on posts in the ground, on hanging brackets, or flat against a wall. On install day, the crew confirms placement with you, sets the hardware, and mounts the sign. Post installs include setting posts in concrete at the right depth.

We check level and alignment, make sure every fastener is secure, and touch up any hardware marks. Before we leave, we clean the area and walk you through care for the finish and gold leaf.

process vectorPricing

What Affects the Cost of a Carved Sign

Carved and gilded signs involve skilled handwork, so cost depends on size, detail, and finish. These are the main drivers.

Size and Thickness

Larger and thicker panels use more material and carving time. Thicker panels also allow deeper carving.

Material

HDU and wood each have different material and finishing needs. Some wood species cost more and need extra sealing.

Carving Detail

Fine lettering, logos, and illustrations take more carving and hand cleanup than simple text.

Gold Leaf Area

Gilding is applied by hand, sheet by sheet. More gilded area means more gold and more labor.

Number of Paint Colors

Each added color needs masking and separate coats. Multi-color designs take longer to finish.

Mounting Method

Post installs, hanging brackets, and wall mounts each need different hardware and labor. Decorative posts and brackets add to the total.

process vectorTwo Locations

Serving Long Island and Dallas-Fort Worth

Same company, same in-house process. Reach the team closest to your project, or browse all of our sign services.

New York

Farmingdale, NY

1021 Fulton St, Farmingdale, NY 11735

Serving Nassau County, Suffolk County, and greater New York. Mon to Fri, 9am to 5pm. Saturday by appointment.

Texas

Arlington, TX

7100 S Cooper St, Arlington, TX 76001

Serving Arlington, Fort Worth, Dallas, and the Dallas-Fort Worth area. Contact: Estimating Team, info@dollarsignus.com.

Historic districts on Long Island and in Dallas-Fort Worth often have their own sign design rules.

Each town or city sets its own sign rules, and historic districts may add review of materials, colors, and style, with approval timing set by them. We prepare drawings and finish details for your application so the review has what it needs. Need help with approvals? See our sign permit expeditor service.

process vectorCare and Lifespan

Caring for Carved and Gilded Signs

HDU signs hold up well outdoors, but the paint is what protects the panel. Inspect the sign each spring for chips or cracks in the paint, especially along carved edges and the top of the panel where water sits. Small touch-ups keep moisture out and the sign looking sharp.

Gold leaf does not need polishing. Rinse it gently with water and let it air dry. Avoid cleaners and rough cloths that can scratch the gilding. For outdoor signs on posts, see our gallery for finished examples.

Simple upkeep

  • Rinse with plain water and a soft cloth, never abrasive pads
  • Never use solvents or polish on gold leaf
  • Touch up paint chips promptly to keep moisture out
  • Check posts and brackets once a year for loose hardware

process vectorOur Projects

Recent Sign Projects

Happy Dollar Sign clients
5 stars

4.9 Rating in New York

Signs and graphics designed, built, and installed by our team. Browse more finished work in our project gallery.

Project photos are loading.

process vectorFAQs

Carved and Gold Leaf Sign Questions

What is HDU and why use it instead of wood?

HDU stands for high density urethane. It carves cleanly, holds fine detail, and does not rot, crack, or warp like natural wood outdoors. We still carve wood when a client wants natural grain.

Get a Carved Sign Quote in 24 Hours

Send us your wording, size, and style. We will return a custom quote within 24 hours after we receive your details.

Texas projects: call 817-883-0676 or use the Arlington quote form.